Model PS2Z
Are you
looking for a Panel Cutting Saw which will give you the highest output,
the best dimensional accuracy coupled to a superior quality cut? Then
look no further than our PS 2Z machine!
 zoom
This
machine guarantees:
- Dimensionally
accurate finish cuts over many years - with wear-free ground and
hardened cylindrical guides for the sawing unit and material pusher
system
- Maximum
dimensional stability - with dimensions taken by separate precision
measurement racks operating independently of the driving system.
- High
dividing output - due to high traversing speed and automatic feeding
by means of the lifting table.
- Short
cutting cycles because of optimized saw movement and beam opening
- Control PC6000, the future designed control concept for the panel cutting. User friendly and clear with a 19" TFT screen.
Mayer clamps
Long execution - therefore it is possible to push parts up to 300 mm beyond the cutting line.
|
Lifting table with motor
driven side roller track for automatic feeding.
More details to your advantage:
 Power Pack II
increased
feed speed of the saw carriage from 5-130 m/min. Return speed 150 m/min.
With optimized opening height of
the clamping beam, optimized cutting height and cutting length adjustment.
This gives extrem short cutting
cycles
(up to 12 cycles per minute).
Electronically controlled pushers for the lifting table. Even
thin or corrugated panels can be loaded without problems, since the pusher
units are controlled independently of each other.
Mayer clamps in operation.
Each clamp has two pressure fingers. This guarantees positive clamping
of very narrow strips. |
|
Otto Mayer
Maschinenfabrik
GmbH
D-72290
Loßburg/
Lombach
Telefon:
07446/956030
Fax:
07446/9560350
|
